Specifications:

• Package includes: 1 x Turbo Air Intake Saver Fan ( Single Propeller ); 2 x Non-Slip Rubber Holder

• Measurement: Length: 2 Inch; Diameter: 2 1/2 Inch

• Material: Light Weight High Quality Aluminum And Rubber

Features:

• Maximum Movement Speed: 55,000 RPM / Minute

• Custom Design, Impressive Appearance Enhancement To Your Car

• High quality, great replacement for your old ones

Fitment:

• Universal Fit For All Vehicles With Intake / Supercharger Size 2 1/2 Inch – 2 7/8 Inch

Installation Instruction:

• Remove air cleaner in the intake hose and put the intake fan into the air inlet hose

• If the intake fan is smaller than the air inlet hose, please attach the rubber holder to increase its diameter and then it can fit in the tube

Note:

• Please no disputes or negatives, we realize this product is a little hard to install on some vehicles

• Please measure air intake opening before purchase

• Please have professionals to install the items to avoid any trouble which is often caused by inexperienced installer

Kindly reminder: Please note that All of our packages are shipped from Hong Kong, and it normally takes 7-20 business days to receive.

The HP Turbo Heat Shield Kit can help to increase horsepower and reduce turbo lag while protecting other engine components. Unlike other turbo heat shield kits that use exhaust wrap, Their HP Turbo Kit features extreme temperature insulation materials, which provides greater heat protection, performance, and durability. HP complete turbo kit includes Their extreme temperature turbo blanket and Their Heatshield Armor for your down pipe, making turbo heat shield insulation kit on the cutting edge of technology and performance. Capable of withstanding 1800F continuous, the turbo heat shield kit is designed for street performance and even the most hardcore racing applications. Using a simple 2 piece design with comprehensive instructions, installation is simple even for the novice installer.

2.50″ Universal aluminum pipe kit ( black silicone)

Kit including:

2x 90 Degree Mandrel bend
2x 45 Degree Mandrel bend
2x 180 Degree U bent Mandrel pipe
2x straight pipe
8x 2.00″ 3 polyester reinforced High temperature silicone hose.
16x 2.00-2.50″ T-Bolt Clamp best for turbo application.

All Piping are approximately 22″ long. Pipe thickness:2mm.Pressure Rating: 35PSI

Temperature Rating:-65F to 350F

AN10 Oil Line Feed + Drain kit for Turbo Application This kit is most complete Oil line kit for NA to Turbo Conversion. No Weld is needed on the Oil Pan, All Bolt on. All flange/fitting are CNC quality, not the Cast Junk ones like others. Oil Feed is AN4, with AN4 oil feed line, AN4 oil Feed fitting with built in oil restrictor to provide proper oil to turbo. Drain is AN10, with AN10 drain flange bolt to the turbo and AN10 Bolt on adapter to oil pan (no welding). This kit Comes with: – 1x AN10 Aluminum Oil drain return Flange that bolts to Turbo ( 2-Hole-Centerline Distance=51mm or 2″) works for many turbos. – 1x AN4 Aluminum Oil feed Flange (with Oil Restrictor Built in) that bolts to the Turbo (2-Hole-Centerline Distance=38mm or 1.5″) works for many turbos. – 1x AN10 Stainless Oil Return Fitting that bolts to the oil Pan. Our unique design does not require welding on the oil pan, just bolt inside and out. – 1x AN10 Braided Oil drain return Line, 2 ft long. – 1x AN4 Braided Oil Feed Line. Female AN4 on both ends, 4 ft long. Comes with 4 way Splitter and cap. – 1 x AN10 Straight Fitting – 1 x AN10 90 Degree Fitting

HKS 71008-AK001 Universal SSQV4 BOV Blow Off Valve

CXRacing 2.5″ O.D. Mandrel Bent Black Universal Aluminum Piping Kit + Turbo BOV Kit.Aluminum Pipes + Silicon Hoses + T-Clamps + Turbo BOV Kit.Great for Many Turbo Intercooler Applications, 2mm Thickness, 18″ Long/Each.- 2.5″ Piping Kit:Straight Aluminum Pipe x2.45 Degree Black Aluminum Pipe x2.180 Degree U Black Aluminum Pipe x2.90 Degree Black Aluminum Pipe x4.Straight Silicon Hose x6.90 Degree Elbow hose x1.45 Degree Elbow hose x1.Stainless Steel T-Clamp x16.- Blow Off Valve.- 2.5″ Black Aluminum BOV Flange Pipe.- Vacuum Hose and Accessories.This Kit Comes with Blue Hoses.Highlights:- 2.0mm Thickness Aluminum Pipe, Mandrel Bent, Black Powder Coated.- Each Pipe is 18″ in Length.- Each Pipe is Individually Wrapped with Protection Paper.- Each end has a bead, or rolled up (Except Odd Shape Pipes).- Top Quality Silicon Hoses (3 or 4 Layers of Silicone, Depends on Size).- Top Quality Stainless Steel T-Bolt Clamp.Items Includes:- Aluminum Pipes.- 2.5″ Aluminum BOV Flange Pipe + Blow Off Valve,with Vacuum Hose and Accessories.- Silicon hoses and Stainless Steel T-Clamps.

Boost controller is device to control the boost level produced in the intake manifold of a turbocharged or supercharged engine by affecting the air pressure delivered to the pneumatic and mechanical wastegate actuator. Boost controller can be a simple manual control which can be easily fabricated, or it may be included as part of the engine management computer in a factory turbocharged car, or an aftermarket electronic boost controller.

2.5″ Universal Aluminum Piping Kit 2U Shape.This kit includes: 2.5″ Straight Pipe x2 2.5″ 45 Degree Bend pipe x2 2.5″ 90 Degree Bend pipe x2 2.5″ 180 Degree Bend U pipe x2 2.5″ Straight Silicon Coupler Hose x6 2.5″ 90 Degree Elbow Silicon Hose x2 2.5″ Stainless Steel T-Bolt Clamp x16.These are High Quality 6061 Alumminum Alloy Pipes- Mandrel bend- Polished- Each pipe is 18″ in length- Each pipe is bead, or rolled of each end- 2mm thick wall, better than other pipes.The default color of silicon coupler is Black.

Kensun HID Conversion Kit Universal Single Beam Relay Wiring Harness

Annoying flickering? Factory headlight outputs are designed to power a halogen light bub, not an HID ballast, therefore flickering can occur. A relay harness is designed to deliver steady voltage to your HID ballasts directly from the car battery.

Compatible with 35W – 55W

• Protects your HID system by drawing stable current directly from your battery
• No more flickering due to low electrical current
• 40 Amp relay and 30 Amp fuse
• High Quality materials for maximum durability and performance
• One relay harness powers both driver and passenger sides
• Fits all single beam bulbs – H1, H3, H4, H7, H8, H9, H10, H11, H13, 5202, 880, 881, 9004, 9005, 9006, 9007
• Includes : 1x Kensun High Quality HID Universal Single Beam Relay Harness

Check out our other listings for more quality Kensun products for your vehicle.

Seeking for pure power? This is what you need. This is a custom turbo kit designed for specific applications.

Package Includes:

Turbocharger Spec:

Compressor:

Turbine: