Auto Dynasty’s Blow-Off Valve (BOV) is a pressure relief device on the intake tract to prevent the turbo??s compressor from going into surge. When the throttle is closed rapidly, the airflow is quickly reduced, causing flow instability and pressure fluctuations. Surge can eventually lead to thrust bearing failure due to the high loads associated with it. This Blow Off Valve uses a combination of manifold pressure signal and spring force to detect when the throttle is closed. When the throttle is closed rapidly, the BOV vents boost in the intake tract to atmosphere to relieve the pressure, helping to eliminate surge.

CXRacing 2.5″ O.D. Mandrel Bent Black Universal Aluminum Piping Kit.Aluminum Pipes + Silicon Hoses + T-Clamps.Great for Many Turbo Intercooler Applications, 2mm Thickness, 18″ Long/Each.- 2.5″ Piping Kit:Straight Black Aluminum Pipe x2.180 Degree U Black Aluminum Pipe x2.45 Degree Black Aluminum Pipe x2.90 Degree Black Aluminum Pipe x2.Straight Silicon Hose x6(Black).90 Degree Elbow Hose x2(Black).Stainless Steel T-Clamp x16.Highlights:- 2.0mm Thickness Aluminum Pipe, Mandrel Bent, Black Powder Coated.- Each Pipe is 18″ in Length.- Each Pipe is Individually Wrapped with Protection Paper.- Each end has a bead, or rolled up (Except Odd Shape Pipes).- Top Quality Silicon Hoses (3 or 4 Layers of Silicone, Depends on Size).- Top Quality Stainless Steel T-Bolt Clamp.Items Includes:- Aluminum Pipes.- Silicon hoses and Stainless Steel T-Clamps.

A manual boost controller is a simple mechanical and pneumatic control to allow some pressure from the wastegate actuator to escape or bleed out to the atmosphere or back into the intake system. This can be as simple as a T-fitting on the boost control line near the actuator with a small bleeder screw. The screw can be turned out to varying degrees to allow air to bleed out of the system, relieving pressure on the wastegate actuator, thus increasing boost levels. These devices are popular due to their negligible cost compared to other devices that may offer the same power increase.

Fitment

Universally applicable to any vehicle with a Turbocharged/Supercharged engine

Features:

100% Brand new & Never used

Material: High Quality CNC-machine Aluminum with anodized finish

Controller Dimension: L: 3.2inch W: 0.75inch H: 0.75inch

Color: blue

Hose length: 38.5 inch

High Performance Manual Boost Control From 0~30 psi Capacity

Flexible control in boosting horsepower and torque

Boost Controller allows you to adjust PSI ratings without changing the wastegate springs as well as replacing the wastegate springs

Professional installation is highly recommended (No instruction included)

Package include:

1 Turbo boost controller kit with some accessories. (as pic)

Installation Guide Is NOT Included.

Auto Dynasty’s Manual Boost Controller is a simple mechanical and pneumatic control to allow some pressure from the wastegate actuator to escape or bleed out to the atmosphere or back into the intake system. It works as a T-fitting on the boost control line near the actuator with a small bleeder screw. The screw can be turned out to varying degrees to allow air to bleed out of the system, relieving pressure on the wastegate actuator, thus increasing boost levels. Auto Dynasty’s Boost Controllers are popular due to their negligible cost compared to other devices that may offer the same power increase.

Package Includes:

Intercooler + Piping + Silicon Hose + T-ClampTube & Fin Intercooler-Core Size: 22x7x2.25 inch -Overall Size: 28x7x2.5 inch-Inlet and outlet sizes: 2.5 inch Great for Many Turbo Intercooler Applications. Item(s) Included: -Intercooler x1 -2.5″ Straight Aluminum Pipe x2-2.5″ 45 Degree Aluminum Pipe x2-2.5″ 75 Degree Aluminum Pipe x2-2.5″ 90 Degree Aluminum Pipe x2 -2.5″ Straight Silicon Hose (BLACK)x6 -2.5″ 90 Degree Hose (BLACK)x2 -2.5″ Stainless Steel T-Clamp x16

1. Universal fitment for all vehicles models（Do not fit piping inlet which is more than 2.5inch）

2. Made of high quality and light weight aluminum

3. Make your vehicle sound like a turbo vehicle with the turbo system or blow off valve

4. CNC Machined from 6061 T-6 Aluminum

5. 1″ Inlet for best effect

6. Size:L 33mm(Diameter)

Tail Pipe:44-55

Lenght:11

Displacement :2000cc more than

7. Easy to install, can be installed under 2 minutes

Installation:

Loosen the screw on the Turbo Sound Whistle

Place the Turbo Sound Whistle body inside the exhaust muffler with the larger opening facing the inside of the muffler

Screw the screws on the Turbo Sound Whistle to tighten the item so it doesn’t fall off while driving

Professional installation is always recommended, products damaged through self-installation will not be refunded

Packaged include:

1x Turbo Sound Simulator Whistle

Budget Series Fuel Pressure Regulator – If this is a mission critical fuel pressure regulator you need, this is not for you. Please consider the price for what you get. We appreciate your understanding

Brand new Boost Control Valve Kit
Increasing boost pressure is often the most cost effective increase in horsepower
It avoids having to replace waste gate springs, which only give a fixed increase, which is not adjustable
Allow boost pressure to be adjusted above the standard setting
To avoid using un-reliable methods of increasing Boost, such as shortening the actuator rod. This causes spring bind in the actuator and restricts flow through the waste gate.
Designed to be mounted inside the cabin and allows for boost adjustment on the run. Ideal for the active enthusiast
Control boost from the driver��s seat
Detent System for ease of adjustment
Gated System to bring boost on faster
Package Included:
1 x Turbo Boost Controller
Mounting bracket, hose and all fitting hardware supplied

Easily adjustable to prevent premature boost leakage and compressor surge

Seeking for pure power? This is what you need. This is a custom turbo kit designed for specific applications.

Package Includes:

Turbocharger Spec:

Compressor:

Turbine: