DIY UNIVERSAL 28x7x2.5 Inch Turbo Intercooler Piping Kit BOV + Adapter

Intercooler + Aluminum Piping + BOV & Flange Pipe + Silicon Hose + T-ClampLatest Tube and Fin Design, Diamond-Cut Shape Tube, Better Air Flow, Maximizing Cooling EfficiencyTube & Fin Intercooler-Core Size: 22x7x2.25 Inch-Overall Size: 28x7x2.5 Inch-Inlet and outlet sizes: 2.5 InchGreat for Many Turbo Intercooler Applications. Item(s) Included:-Intercooler x1 -2.5″ Straight Aluminum Pipe x2 -2.5″ 45 Degree Aluminum Pipe x2-2.5″ 75 Degree Aluminum Pipe x2-2.5″ 90 Degree Aluminum Pipe x2 -2.5″ Straight Silicon Hose x6 -2.5″ 45 Degree Hose x1 -2.5″ 90 Degree Hose x1 -2.5″ Stainless Steel T-Clamp x16 -Blow Off Valve x1 -2.5″ Aluminum BOV Flange Pipe x1 -Vacuum Hose And Accessories

Silver Universal Adjustable Billet Aluminum Type-2 Turbo SQV Blow Off Valve BOV

The Blow-Off valve (BOV) is a pressure relief device on the intake tract to prevent the turbo’s compressor from going into surge. When the throttle is closed rapidly, the airflow is quickly reduced, causing flow instability and pressure fluctuations. Surge can eventually lead to thrust bearing failure due to the high loads associated with it. Blow-Off valves use a combination of manifold pressure signal and spring force to detect when the throttle is closed. When the throttle is closed rapidly, the BOV vents boost in the intake tract to atmosphere to relieve the pressure, helping to eliminate surge.

Universal Car Turbo Sound Whistler Muffler Exhaust Pipe Blow Off Valve 35mm

  • This muffler whistler is used to give your exhaust that sporty whistling sound.Make your vehicle sound like a turbo vehicle with the turbo system or blow off valve.Universal fitment for all vehicles models. Made from light weight aluminum. Installation: Loosen the screw on the Turbo Sound Whistle.Place the Turbo Sound Whistle body inside the exhaust muffler with the larger opening facing the inside of the muffler.Screw the screws on the Turbo Sound Whistle to tighten the item so it doesn’t fall off while driving.Professional installation is always recommended, products damaged through self-installation will not be refunded.

Car Fake Turbo Electronic Hooter Dump Blow Off Valve BOV Analog Sound-Simulator Kit For Acura Honda Lexus Nissan Subaru Toyota

• Condition: 100% Brand New

• Package includes:

   » 1 x Car Fake Blow off Valve Sound Electronic Turbo with Switch

   » 1 x Mounting Bracket

   » Set of Mounting Accessories

• Size (As the Picture Shown):

   » Height: 4.33″” (11cm)

   » Diameter: 4.72″” (12cm)

• Color: Black + Red

• Material: High Quality ABS Housing

• Weight: 543g

• 4 wires connection system. (Black is for Negative, Red is for Positive,Blue and Green are for the Switch)

Feature:

• Universal Auto parts car fake dump Valve electronic turbo blow off valve sound

• Applicable models: general without TURBO

• According to the loading: connect the cathode wires battery, switch connected to the vehicle accelerator

Installation Instructions:

1) Wired red wire to positive battery terminal

2) Wired black wore to negative terminal

3) Fed switch wires (blue and green) through fire wall to accelerator pedal

4) Attached micro switch to accelerator pedal

5) Connected switch to the normally closed terminal and earth terminal on micro switch

6) Push accelerator fully in, when releasing the speaker makes dump valve sound

Fitment:

• Applicable to Most Auto Car Vehicle Automobile.

* Note: Please check the pictures for installation guide.

* Professional installation is highly recommended.

* Please read all description & fitment before ordering the product.

* All of our packages are shipped from
Hong Kong, and it normally takes 7-20 business days to receive

* Your satisfaction is our utmost concern. Please contact us to resolve any issue before leaving any neutral or negative feedback

21.75″ x 11.75″ x 3″ Universal Black Front Mount Turbo Intercooler with 3″ Red Piping Kit

Front-Mount Intercooler:
When the charged air enters the end tank, it travels through the tubes of an Intercooler, in which the heat is transferred via fins, where cooler ambient air passes over the tubes. This mechanism further removes heat from air before exiting the opposite end tank and routing to the engine.
Bar and Plate Intercooler functions identically to the Tube and Fin Core, with the exception that, charged air travels through its rectangular shaped passages, which have more surface area; thus, improves cooling effect and power of the charged air. The advantage of this type of intercoolers is that, since the bar and plate core affords up to 35% larger surface area for cooling, a physically smaller intercooler can be used and still retains the cooling efficiency of a larger tube and fin design. This is important for a builder who has a vehicle with a compact opening in the front of it or when there are immovable obstructions present.

Universal Intercooler Piping Kit:
Aircraft grade aluminum is the preferred choice for intake and intercooler piping. Very light weight, durable and excellent heat sink capabilities. Can also be polished for that show car appearance.

EZ Lip PRO Universal Spoiler 8.5 Feet

The EZ Lip Pro is our largest and most durable universal spoiler lip. Designed for those who want maximum scrape protection and maximum low. Made from our toughest Dura-X Foam rubber compound and featuring our new Patent-Pending InvisEdge. Quality 3M automotive tape easily endures all climates, car washes and high speeds.

28″ x 9″ x 2.75″ Universal Front Mount Turbo Intercooler with 2.25″ Silver Piping Kit

Front-Mount Intercooler:
When the charged air enters the end tank, it travels through the tubes of an Intercooler, in which the heat is transferred via fins, where cooler ambient air passes over the tubes. This mechanism further removes heat from air before exiting the opposite end tank and routing to the engine.
Bar and Plate Intercooler functions identically to the Tube and Fin Core, with the exception that, charged air travels through its rectangular shaped passages, which have more surface area; thus, improves cooling effect and power of the charged air. The advantage of this type of intercoolers is that, since the bar and plate core affords up to 35% larger surface area for cooling, a physically smaller intercooler can be used and still retains the cooling efficiency of a larger tube and fin design. This is important for a builder who has a vehicle with a compact opening in the front of it or when there are immovable obstructions present.

Universal Intercooler Piping Kit:
Aircraft grade aluminum is the preferred choice for intake and intercooler piping. Very light weight, durable and excellent heat sink capabilities. Can also be polished for that show car appearance.